Click for Larger ViewMattei MCD Series Refrigerated Air Dryers
325 to 3,000 SCFMMattei MCD Series energy saving cycling dryers automatically start and stop the refrigeration compressor to maintain dew point and keep your air system free of water. They are cost effective in saving you energy and wear and tear, and are idea for applications where the ambient temperature remains above freezing.
The MCD Series energy saving refrigerated air dryers match energy consumption to actual plant air demands to save you energy and remove the moisture from your compressed air.
Advanced temperature sensing technology cycles the compressor on-and-off to maximize energy savings and boost productivity from 325 through 3,000 scfm at pressures to 203 psi g.
Featuring hot gas bypass refrigeration controls and cycling compressor technology, you also get oversized heat exchangers with <2 psi pressure drop, quiet scroll compressors, R407C refrigerant, and a direct exchange concept which avoids the increased power consumption of thermal mass type dryers.
Standard features include:
• Digital LED dew point display
• Automatic DemandSmart Cycling or Hot Gas Bypass Operation
• Self-diagnostic control with warnings and alarms
• DemandSmart energy management system
• Optional RS485 BMS interface
• Digital LED dew point display
• Automatic DemandSmart Cycling or Hot Gas Bypass Operation
• Self-diagnostic control with warnings and alarms
• DemandSmart energy management system
• Optional RS485 BMS interface
Model(s): MCD-325, MCD-400, MCD-500, MCD-700, MCD-800, MCD-1000, MCD-1200, MCD-1600, MCD-2000, MCD-2400, MCD-3000
Nominal Capacity based on: Ambient temperature 100°F, Inlet temperature 100°F, Inlet pressure 100 psi g.
* 575V UNITS ARE AVAILABLE FOR THE CANADIAN MARKET IN PLACE OF 460V
Maximum inlet temperature: 140°F (60°C)
Minimum ambient temperature: 41°F (5°C)
Maximum inlet pressure: 203 psi g (14 bar g)
Refrigerant: R407c
Delta P 2.0 psi d on average
Smart Control multi-functional control panel with
- digital dewpoint display
- multiple alarm indication
- maintenance reminder
- synoptic display
- status report
- volt free alarm contact
- optional RS485 connection
- fully programmable
- hour meter
Plus Pack continuous separation cross-flow heat exchanger (patent pending)
- 4-in-1 design
- extremely low pressure drop levels
- non-velocity sensitive demister for highly efficient removal of condensed liquid
Plus Drain zero air loss condensate removal system with adjustable set points
- zero air loss
- self programming and self diagnostic operation
- alarm function with automatic switch over to pre-programmed timed operation
Plus Save dryer cycling control (patent pending)
- continuously and automatically adjusts itself to the actual working parameters
- accurate dewpoint control
- sophisticated self learning control algorithm
On/Off switch with integrated disconnect switch
Compliant scroll compressor
- energy savings up to 20% versus traditional piston compressors
- nearly indestructible and highly reliable compliant technology (tolerates liquid returns)
- no pre-heating required
- compressor motor overload protection
NOTE: Models MCD 325 - MCD 3000 include the following equipment as standard:
-multi-functional control panel
-continuous separation cross-flow heat exchanger (patent pending)
-zero air loss condensate removal system with adjustable set points
-dryer cycling control (patent pending)
-on/off switch with integrated disconnect switch
➤ Click Here for MCD Correction Factors Chart
Nominal Capacity based on: Ambient temperature 100°F, Inlet temperature 100°F, Inlet pressure 100 psi g.
* 575V UNITS ARE AVAILABLE FOR THE CANADIAN MARKET IN PLACE OF 460V
Maximum inlet temperature: 140°F (60°C)
Minimum ambient temperature: 41°F (5°C)
Maximum inlet pressure: 203 psi g (14 bar g)
Refrigerant: R407c
Delta P 2.0 psi d on average
Smart Control multi-functional control panel with
- digital dewpoint display
- multiple alarm indication
- maintenance reminder
- synoptic display
- status report
- volt free alarm contact
- optional RS485 connection
- fully programmable
- hour meter
Plus Pack continuous separation cross-flow heat exchanger (patent pending)
- 4-in-1 design
- extremely low pressure drop levels
- non-velocity sensitive demister for highly efficient removal of condensed liquid
Plus Drain zero air loss condensate removal system with adjustable set points
- zero air loss
- self programming and self diagnostic operation
- alarm function with automatic switch over to pre-programmed timed operation
Plus Save dryer cycling control (patent pending)
- continuously and automatically adjusts itself to the actual working parameters
- accurate dewpoint control
- sophisticated self learning control algorithm
On/Off switch with integrated disconnect switch
Compliant scroll compressor
- energy savings up to 20% versus traditional piston compressors
- nearly indestructible and highly reliable compliant technology (tolerates liquid returns)
- no pre-heating required
- compressor motor overload protection
NOTE: Models MCD 325 - MCD 3000 include the following equipment as standard:
-multi-functional control panel
-continuous separation cross-flow heat exchanger (patent pending)
-zero air loss condensate removal system with adjustable set points
-dryer cycling control (patent pending)
-on/off switch with integrated disconnect switch
➤ Click Here for MCD Correction Factors Chart
No Options Available